Landrover S1. . . how tough is it really?

Well how tough is it? I've had this phone since december now, and whilst I did some initial testing to check general toughness (throwing in water etc) I'd been wanting to push it a bit further. I was working this weekend, and one of the kids I was working with spotted my phone clipped to my belt. This sparked off a series of "Sir can I smash your phone on the ground" and "Sir can I tip my drink on your phone". Now whilst not keen on letting a group of lads from Stoke boot my phone around part of me was curious to see what would happen. And given it had a 3 year guarantee on it with the tagline "you break it for any reason we replace it" I was tempted. Later on in the day we were up in the high ropes tower doing the "parachute jump" (very cool indeed and worth checking out www.stanleyhead.org.uk, weekend bookings available :) )and one of the kids said "Sir if your phone is that tough then proove it".

Never one to back away from a challenge, I looked over the edge of the tower to check for people below(see pic) then promptly dropped it over the side of the tower. If nothing else this achieved a loud gasp from the group of lads in question. But what was even more impressive was when I got back down to the ground and inspected the phone, not only did it work fine, there was not even a scratch on it! Impressive!

During the weekend I did a number of other tests on the phone, including dropping it out of the bouldering room abseil hatch onto concrete, dunking it into my tea, leaving it in the freezer, and various other horrible things, and it still works perfectly.

The only problem I experienced is that if you drown it in water, water can get into the speaker hole, best way I've found it to leave it upside down for a short period to allow water to drain out. I should add this doesnt damage the phone just water getting stuck in the the hole!

Awesome piece of kit!

Black diamond Blizzard accessories

RRP £5.99 (Clipper) & £8.00 (holster)
I have a black diamond blizzard harness, and I've always loved it for it's comfort, good fit and quality build. Black diamond also do 2 accessories for this harness to aid the budding winter climber. I now have both of these;









Black Diamond Blizzard Holster:
This small webbing holster attaches to the blizzard (or any other harness) and allows the user to holster one or both of their ice tools whilst placing gear etc. I would say its a nifty little accessory, but can be a little bit fiddly holstering 2 tools, however to holster one tool at a time is very easy! Overall, nice addition to my harness and easy to use.











Black diamond ice clipper:
This is the best few quid ive ever spent! It is such a great bit of kit. It allows you not only to rack your ice screws easily, but also when trad climbing its very easy to stow gear when seconding, or clip you belay device to avoid fannying around at the top of route finding it. The ice clipper will fit to any harness, however the BD blizzard has custom slots to slide these in, making them even more secure! My friend Matt Reynolds also loves these:

"BD ice clippers. These little plastic 'biners are simply like the most innovative idea ever (not just BD ones, I mean the whole concept). For those that don't know then they are little plastic 'biners that are held sort of poking out from your harness so you can rack screws (or anything you want) on them. I brought 2 initially as I was trying to expand my summer harness with more gear loops (I just brought a DMM Renegade in the end, another quality piece of kit)."

Taken from http://www.lifeattheendofarope.blogspot.com/ (worth a read for some of Matts Crazy Stories!)

Overall Black Diamonds 2 cheap accessories make a good harness even better, and for the few quid involved its very worth investing! I now have a holster for my axes AND an ice clipper on the left and right of my harness for ice screws and anything else!

Mountain Equipment Kongur MRT

RRP: £320

This Christmas my parents wanted to buy me a new jacket to update my Millet Hardshell that I’ve had since I was 18. When thinking of which jacket I wanted the first think that sprung to mind was “Mountain Equipment”. I am in no doubt that Mountain Equipment is one of the (if not THE) best company out there at the moment. I own a number of mountain equipment products, all of which have stood the test of time, and been damn good in the process. But any hardshell I bought would have to be as good as my Millet one (no easy task!). My Millet jacket has been my faithful companion in sub zero temperatures in the depths of Scottish winter, at 18,500ft above sea level in the Himalayas, in dust storms in Iceland glacial plateaus, through my ML training and ML assessment, and through countless crap days in Stoke! So in replacing it I needed a jacket that would fill that gap. I had already tried on the ME Kongur and had liked it. At £280 the Kongur was not cheap. I was also aware of the Kongur MRT a beefed up stronger version of the Kongur. The Kongur itself came highly recommended, it had won Trail’s ultimate waterproof test twice and had ringing endorsements from numerous reviewers. The MRT version was £40 more than the Kongur. However on reading about it I figured I might as well get that one.
The Kongur came on Christmas day and good lord is it good! The jacket uses Gore’s latest Gortex fibre – proshell. It feels very crinkly, I don’t know whether this is just because it is a new jacket! The toughened fibres on the shoulders, arms, and back feel very substantial, almost feels like a canvas material in a way. All the zips are waterproof including the pit zips (for added ventilation), and the cut of the jacket is perfect. What I would also say about the jacket is unlike a number of mountain equipments other jackets, the sizing is slightly larger on this. The XL fits me with plenty of room for extra layers underneath. The mood is the usual level of high quality I’ve come to expect from Mountain Equipment, plenty big enough for a helmet underneath – my salamander has quite lower clearance, however I have tried it with an Elios and Ecrin underneath and they fit just as well. The other added perk to the new Kongur is the reflective stripping added to increase visibility in bad conditions.

All in all the extra £40 is definitely worth it! The toughened fibres are brilliant! The Kongur MRT is on offer on theoutdoorshop.com at £240 at the moment which is a fantastic offer for a fantastic piece of kit. I also like the fact that the colour scheme of red and black is similar to my trademark red and grey Millet hard shell.

FEATURES & BENEFITS (From www.mountain-equipment.co.uk)
• 3 Layer Gore-Tex® Pro Shell Ascendor
• 3 Layer Gore-Tex® Pro Shell Lofoten reinforcements
• 3M® reflective detailing for visibility in poor weather & darkness
• Super longer cut provides exceptional protection
• Award winning helmet compatible Stealth construction hood
• Stealth construction techniques used throughout
• Slim double centre front storm flaps
• 2 large chest pockets can be used whilst wearing a rucksack or harness
• 2 external map pockets allow hidden access to stored items
• Underarm Water resistant pit zips for ventilation